Argoclima Dry Digit 17 Operations Instructions Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
13
V 12/14
DRY BABY 11 CONTROL PANEL
HUMIDITY ADJUSTER KNOB: sets the desired humidity %. Turn the knob fully counterclockwise (seen from in front
of the appliance), to turn the appliance OFF.
Turn the knob clockwise (seen from in front of the appliance) to set the humidity % (decreasing)(80-35%).
TANK FULL LED: when the tank is full, the TANK FULL LED comes on and the appliance stops running. A 10
second beep sounds. Remove the tank and empty it (as indicated in "HOW TO ELIMINATE CONDENSATION"),
the restore it; the dehumidifier will start running again.
STAND BY LED.
DEFROST LED: the dehumidifier is designed to operate at ambient temperatures from + 5°C to + 35°C.
If it is operated at low temperatures, ice may form on the evaporator, degrading its operation.
When this happens the dehumidifier goes into defrost mode and the defrost LED comes on. The compressor
stops, but the fan continues running.
We recommend not using the dehumidifier in room temperatures lower than 5°C.
AUTO RESTART: the dehumidifier starts up again after a power failure.
DRY DIGIT 13 AND 17 CONTROL PANEL
1. ON/OFF BUTTON: press this button to turn the dehumidifier on and off.
2. FILTER BUTTON
: after 250 hours of operation, the FILTER RESET led turns on to indicate that it is time to clean
the filter. Take the filter out and clean it. Then press the FILTER button.
DEFROST LED
TANK FULL
LED
STAND BY LED
HUMIDITY ADJUSTER KNOB
LOW AND HIGH FAN
SPEED
TANK FULL LED
TIMER LED
STAND BY LED
CONTINUOUS OPERATION
FILTER RESET LED
Page view 4
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments